Biosynthesis of zinc oxide nanoparticles using Euphorbia milii leaf constituents: Characterization and improved photocatalytic degradation of methylene blue dye under natural sunlight

A facile biosynthesis route was followed to prepare zinc oxide nanoparticles (ZnO NPs) using Euphorbia milii (E. milii) leaf constituents. The SEM images exhibited presence of spherical ZnO NPs and the corresponding TEM images disclosed monodisperse nature of the ZnO NPs with diameter ranges between 12 and 20 nm. The Brunauer–Emmett–Teller (BET) analysis revealed that the ZnO NPs have specific surface area of 20.46 m²/g with pore diameter of 2 nm–10 nm and pore volume of 0.908 cm³/g. The EDAX spectrum exemplified the existence of Zn and O elements and non-appearance of impurities that confirmed pristine nature of the ZnO NPs. The XRD pattern indicated crystalline peaks corresponding to hexagonal wurtzite structured ZnO with an average crystallite size of 16.11 nm. The FTIR spectrum displayed strong absorption bands at 512 and 534 cm^?1 related to ZnO. The photocatalytic action of ZnO NPs exhibited noteworthy degradation of methylene blue dye under natural sunlight illumination. The maximum degradation efficiency achieved was 98.17% at an illumination period of 50 min. The reusability study proved considerable photostability of the ZnO NPs during photocatalytic experiments. These findings suggest that the E. milii leaf constituents can be utilized as suitable biological source to synthesis ZnO NPs for photocatalytic applications.     

Engineering nanostructures of CuO-based photocatalysts for water treatment: Current progress and future challenges

Nowadays, increasing extortions regarding environmental problems and energy scarcity have stuck the development and endurance of human society. The issue of inorganic and organic pollutants that exist in water from agricultural, domestic, and industrial activities has directed the development of advanced technologies to address the challenges of water scarcity efficiently. To solve this major issue, various scientists and researchers are looking for novel and effective technologies that can efficiently remove pollutants from wastewater. Nanoscale metal oxide materials have been proposed due to their distinctive size, physical and chemical properties along with promising applications. Cupric Oxide (CuO) is one of the most commonly used benchmark photocatalysts in photodegradation owing to the fact that they are cost-effective, non-toxic, and more efficient in absorption across a significant fraction of solar spectrum. In this review, we have summarized synthetic strategies of CuO fabrication, modification methods with applications for water treatment purposes. Moreover, an elaborative discussion on feasible strategies includes; binary and ternary heterojunction formation, Z-scheme based photocatalytic system, incorporation of rare earth/transition metal ions as dopants, and carbonaceous materials serving as a support system. The mechanistic insight inferring photo-induced charge separation and transfer, the functional reactive radical species involved in a photocatalytic reaction, have been successfully featured and examined. Finally, a conclusive remark regarding current studies and unresolved challenges related to CuO are put forth for future perspectives.     

Efficient deep blue organic light emitting diodes based on [2,7,7,13,13-pentamethyl-9-(10-phenylanthracen-9-yl)-7,13-dihydrobenzo[5,6]-s-indaceno[1,2-g]quinoline] derivatives

Abstract

In this study, as the ongoing effort to develop efficient blue OLEDs, two deep blue emitters based on indenoquinoline-substituted anthracene derivatives have been synthesized and characterized. Multilayer organic light emitting diodes were fabricated with the following sequence: indium-tin-oxide (ITO)/4,4’,4’’-tris[2-naphthyl(phenyl)amino (2-TNATA)/4,4’-bis(N-(1-naphthyl)-N-phenylamino) biphenyl (NPB)/Blue emitting materials/Bathophenanthroline (Bphen)/lithium quinolate (Liq)/Al. All the devices showed efficient blue emissions. Particularly, a device using ‘2,7,7,13,13-pentamethyl-9-(10-phenylanthracen-9-yl)?7,13-dihydrobenzo[5,6]-s-indaceno[1,2-g] quinoline’ as an emitter showed a maximum external quantum efficiency (EQE) of 4.92% with the Commission Internationale De L’Énclairage (CIE) coordinates of (0.15, 0.10) at 8.0?V.     

循环流化床粉煤灰可控制备高纯F型八面沸石研究

利用粉煤灰制备沸石分子筛是其高值化利用的重要方向之一.以循环流化床粉煤灰为原料,采用酸浸预处理-氢氧化钠碱熔活化-水热晶化法制备F型八面沸石,并用于吸附亚甲基蓝.考察酸浸温度、碱熔温度及碱灰质量比对粉煤灰结构的影响及碱熔温度、碱灰质量比、液固比及晶化时间对沸石的结构和形貌的影响.通过XRD和SEM对粉煤灰沸石的晶体结构和形貌进行表征.结果表明,利用循环流化床粉煤灰制备高纯F型八面沸石适宜条件为碱熔温度550℃,碱灰质量比1.5:1,液固比12 mL/g,晶体导向剂用量10;,晶化温度100℃,晶化时间20 h.其比表面积高达357 m2/g,且对亚甲基蓝的饱和吸附量高达178 mg/g.     

Efficient catalytic degradation of single and binary azo dyes by a novel triple nanocomposite of Mn3O4/Ag/SiO2

The strategy of structurally integrating noble metal and metal oxides is expected to offer exceptional opportunities toward emerging functions of all. We report the creation of an efficient hetero-structured nanocatalyst consisting of Mn₃O₄ core, SiO₂ shell impregnated with noble Ag nanoparticles. The triple nanocatalyst Mn₃O₄/Ag/SiO₂ was synthesized by using a facile three-step approach to disperse Ag nanoparticles between the surfaces of functionalized Mn₃O₄ and SiO₂. The physicochemical structural characterization was performed by XRD and FTIR. The surface morphologies were observed by SEM and TEM. The EDX measurements confirmed the composition of the composite. The nanocomposite has been used as a catalyst for the degradation of Direct blue 78 in the presence of sodium borohydride (NaBH₄). It has a drastic catalytic effect as compared to Mn₃O₄/Ag and Mn₃O₄. The rate constant of Direct blue 78 reduction followed the order: Mn₃O₄/Ag/SiO₂ (0.25166 min⁻¹) > Mn₃O₄/Ag (0.07971 min⁻¹) > Mn₃O₄ (0.00947 min⁻¹). The effects of different reaction conditions of the catalytic reaction have been determined. The catalytic activity of the as- synthesized nanocomposite was examined for the binary dyes system by incorporation of an additional dye (Sunset yellow). Its influence on the degradation rate and efficiency of Direct blue 78 was investigated. The nanocatalyst exhibited excellent catalytic activity towards the complete degradation of both the Direct blue 78 and Sunset yellow. The degradation percentage for these dyes reached 99.33 and 94.68%, respectively. The recovery and reusability of the Mn₃O₄/Ag/SiO₂ nanocomposite was studied in the reduction reaction of Direct blue 78. Five consecutive recovery reaction cycles were performed. They revealed high stability and constant efficiency of the catalyst for four cycles.     

Kinetic modeling of ZnO-rGO catalyzed degradation of methylene blue

Photodegradation of organic pollutants strongly depends on design of metal oxide semiconductor photocatalysts. Graphene, if composited with ZnO, can effectively enhance its photocatalytic performance for the eradication of pollutants from aqueous medium. Here in, ZnO-rGO is reported as highly active catalyst for degradation of methylene blue. A 200-mg/L solution of methylene blue dye was completely degraded within 1 h in comparison to 74% and 56% degradation over ZnO and rGO, respectively. The commonly used mechanisms of heterogeneous catalytic reactions, the Langmuir-Hinshelwood mechanism, and the Eley-Rideal mechanisms, were used to describe the reaction kinetics. The Langmuir-Hinshelwood mechanism was found as more favorable in this study. Apparent activation energy, E_ap, true activation energy, E_T, entropy, ΔS, and enthalpy, ΔH were calculated as 36.2 kJ/mol, 13.1 kJ/mol, 197.5 J/mol, and 23.1 kJ/mol, respectively.     

1,2-Diketones as photoinitiators of both cationic and free-radical photopolymerization under UV (392 nm) or Blue (455 nm) LEDs

The photoinitiation abilities of three 1,2-diketones [i.e., acenaphthenequinone ( ANPQ ), aceanthrenequinone ( AATQ ), and 9,10-phenanthrenequinone ( PANQ )]-based photoinitiating systems [PISs, with additives such as iodonium salt, N-vinylcarbazole (NVK), tertiary amine, and phenacyl bromide (R-Br)] for cationic photopolymerization and free-radical photopolymerization under the irradiation of ultraviolet (UV; 392 nm) or blue (455 nm) light-emitting diode (LED) bulb are investigated. All 1,2-diketones studied exhibit ground state absorption that match with the emission spectra of UV (392 nm) or blue LED (455 nm) better than that of the well-known blue-light-sensitive photoinitiator camphorquinone (CQ). In particular, AATQ /iodonium salt/NVK can show high photoinitiating ability (with epoxide conversion yield >70%) under the UV light irradiation due to the effect of NVK. In addition, 1,2-diketone/iodonium salt (and optional NVK) systems are capable of initiating free-radical photopolymerization of methacrylates, with conversions of 50–58%. Furthermore, some 1,2-diketone/tertiary amine (and optional R-Br) combinations are found to demonstrate high efficiency to initiate free-radical photopolymerization, and 71% of methacrylate conversion can be achieved with PANQ /tertiary amine/R-Br PIS. Some 1,2-ketone-based PISs can even exhibit higher efficiency than the CQ-based systems. The photochemical mechanism of the radical generation from the 1,2-diketone-based PISs is investigated and found to be consistent with the related photopolymerization efficiency. © 2020 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 792–802     

Rapid reductive degradation of dye contaminated water by using a core-shell nano zerovalent iron (nZVI)

We report on the synthesis of zero valent iron nano particles (nZVI) via chemical reduction method. The large peak visible in the XRD pattern reveals the presence of an amorphous phase of iron. SEM and TEM images signify the dendritic morphology and core-shell-like structure of manufactured nZVI particles respectively. Methylene blue dye (MB) was used as model contaminant to assess the reductive degradation proficiency of nZVI. With complete elimination of MB, the fresh synthesized nZVI exhibited the best performance (97%), while the regenerated nZVI had an 85.1% MB removal efficiency after five regenerations. The equilibrium data of adsorption were fitted to eight different kinetic and isothermal models. The effects of critical operating factors such as pH, varied amounts of nZVI and dye concentration, adsorption temperature, and adsorption time were also studied. A presumptive reaction mechanism and function of core-shell construction in contaminant sequestration has also been investigated.     

碳纳米管制备蓝光石墨烯量子点及其在柔性有机存储器上的应用

通过化学裁剪法打开碳纳米管获得了粒径一致、性能稳定、具有蓝色荧光的石墨烯量子点。该方法属于化学溶液法，具有成本低廉、工艺简单、条件易控等优势。将该样品与半导体聚合物按一定比例混溶，通过旋涂技术形成基于石墨烯量子点掺杂的聚合物复合薄膜，进而制成柔性存储器。该柔性可弯曲存储器具有低驱动电压、接近10³的ON/OFF 比率、较好的循环次数，较好的重复性和稳定性。该研究结果为柔性有机存储器领域的研究展开了新的方向。     

Efficient removal of MB dye using litchi leaves powder adsorbent: Isotherm and kinetic studies

Removal of Methylene Blue (MB) dye using Litchi Leaves Powder (LLP) material was carried out in batch mode. Effect of the mass of the adsorbent (0.1–2.5 g/L), pH of the solution (2−12), starting concentration of MB dye (50–150 mg/L), ionic strength using NaCl (0.1–0.5 M) as an electrolyte, contact time (0–60 min) on the adsorption of MB dye was studied. To calculate pH at which LLP material surface becomes neutral point of zero charge (pH_pzc) is also determined and found to be 6.48. Removal process best fit in the pseudo-second-order kinetic model as indicated by its higher R² value (0.999). Isotherm models (Freundlich and Langmuir) were fitted to the data obtained from the experiment to understand the adsorption behaviour. Result shows that experimental data were fitted to the both isotherm models (Freundlich and Langmuir) as indicated by higher R² value for both Freundlich (0.991) and Langmuir (0.994) model, and it was determined that LLP has a maximum adsorption capacity of 119.76 mg/g.